DPL: streamline option building

[ktf]

• Avoid too nested if conditions
• Do not propagate --ccdb-fetchers for backward compatibility
  in the on-the-fly generators
• Avoid some copying

[alibuild]

Error while checking build/O2/fullCI_slc9 for 72c4ba7 at 2026-04-24 17:11:

## sw/BUILD/O2-sim-challenge-test-latest/log
./sim-challenge.log[ERROR] Workflow crashed - PID 11656 (internal-dpl-aod-writer) did not exit correctly however it's not clear why. Exit code forced to 128.
./sim-challenge.log[ERROR]  - Device internal-dpl-aod-writer: pid 11656 (exit 128)
./sim-challenge.log[ERROR] SEVERE: Device internal-dpl-aod-writer (11656) returned with 128
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
[0 more errors; see full log]

Full log here.

[alibuild]

Error while checking build/O2/fullCI_slc9 for 8ecdc76 at 2026-05-11 06:17:

## sw/BUILD/O2-full-system-test-latest/log
command /sw/slc9_x86-64/O2/slc9_x86-64-slc9_x86-64-local19/prodtests/full-system-test/dpl-workflow.sh had nonzero exit code 128
[9138:internal-dpl-ccdb-backend]: [ERROR] error parsing options of o2-dpl-run: unrecognised option '--configKeyValues'
[ERROR] Workflow crashed - PID 9138 (internal-dpl-ccdb-backend) did not exit correctly however it's not clear why. Exit code forced to 128.
[9136:internal-dpl-clock]: [ERROR] error parsing options of o2-dpl-run: unrecognised option '--buffer-size'
[ERROR] Workflow crashed - PID 9136 (internal-dpl-clock) did not exit correctly however it's not clear why. Exit code forced to 128.
[9844:internal-dpl-injected-dummy-sink]: [ERROR] error parsing options of o2-dpl-run: unrecognised option '--buffer-size'
[ERROR] Workflow crashed - PID 9844 (internal-dpl-injected-dummy-sink) did not exit correctly however it's not clear why. Exit code forced to 128.
[ERROR] Workflow crashed - PID 9168 (tof-diagnostic-calibration) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9146 (tof-compressed-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9140 (MIDRawDecoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9162 (CPVClusterizerSpec) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9141 (tof-compressor-0) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9148 (PHOSRawToCellConverterSpec) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9145 (MIDDecodedDataAggregator) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9139 (HMP-RawStreamDecoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9160 (BadMapCalibSpec) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9172 (emcal-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9143 (its-stf-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9149 (trd-datareader) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9175 (its-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9190 (fdd-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9164 (calib-emcalchannel-badchannel) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9137 (raw-file-reader) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9144 (mft-stf-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9151 (fdd-datareader-dpl) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9152 (ft0-datareader-dpl) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9155 (ctp-raw-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9158 (its-tracker) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9171 (ctp-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9174 (fv0-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9198 (calib-phos-runbyrun) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9598 (residual-aggregator) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9759 (FDD-DigitQcTaskFDD-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9829 (TRD-Tracklets-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9739 (MFT-MFTAsyncTask-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9354 (tof-matcher) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9621 (tpc-calibrator-dEdx) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9154 (zdc-datareader-dpl) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9664 (qc-task-ITS-ITSClusterTask) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9184 (tpc-scaler) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9737 (GLO-MUONTracks-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9744 (TRD-PHTrackMatch-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9288 (MIDTracker) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9188 (zdc-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9607 (ft0-merge-integrated-clusters) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9490 (qc-task-TRD-PHTrackMatch) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9765 (GLO-MTCITSTPC-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9741 (TPC-PID-proxy) was killed abnormally with Killed and exited code was set to 137.
[0 more errors; see full log]

Full log here.